|
| |
|
|
|
VAG K + CAN Commander Software version 6.2
|
|
For all customers who want to buy the VAG CAN +K COMMANDER Software must pay attention to this, that the original software version for the moment is 6.0 but not 8.0 or 9.0, these are fake chinese software copies of our original software and they do not work.
!!! NEW NEW NEW NEW NEW !!!
No more need of precoded transponders by VIN number for SEAT, Volkswagen, Skoda and AUDI cars from 2006 year up. Now with the help of our VAG K + CAN Commander software, Hi Tag 2 Programmer and the new integrated TANGO Programmer you will be able to make and program DEALER KEYS for almost all VAG models including latest 2008+ models (supported are all models which are using Megamos 48 or Hitag-2 transponders) You must use our own precoded transponders TA2/TA3/TA4/TA5 with ABRITES VAG Commander 6.2 software in order to produce dealer keys.
Must be ordered as a new software module - AN016
(you must have Hi Tag 2 and TANGO programmers in order to program these transpnders)
|
VAG-CAN COMMANDER Software is developed to work with the new and old models of Volkswagen, AUDI, SEAT, SKODA and Porsche Cayenne cars equipped with K-Line and CAN communication System from 1995 year to nowadays. With this software you can read the security pin code, change the mileages and kms on all these models, program new keys and do complete diagnostic. The software works with the special CAN interface which are sold as package.
Functions of the VAG COMMANDER Software:
Latest news:
- MAKING and PROGRAMMING DEALER KEYS for almost all VAG models including latest models 2008+ (supported are all models which are using Megamos 48 or Hitag-2 transponders)
- Own precoded transponders TA2/TA3/TA4/TA5 are used in ABRITES VAG Commander 6.2 to produce dealer keys.
- Dealer keys are made from the TA2/TA3/TA4/TA5 using the 6 or 7 bytes of the component protection data (making from the 7 bytes is made immediately while making from the 6 bytes requires till 10min).
- Possible to produce TP22/TP23/TP24/TP25 transponders from the ABRITES TA2/TA3/TA4/TA5 transponders.
- Decoding of the Passat B6 comfort module in order to get all 7 bytes of the component protection data.
- Extended support for MED9x engine control units.
- Extended support for EDC17x engine control units.
- Support of new software versions for Skoda Roomster, Skoda Fabia, VW Polo, Seat Ibiza (2008 year).
Megamos Crypto ID48 transponder
VAG Commander features
Models covered>>>
Download User manual
Models covered for extracting security pin codes
Models covered for Odometer correction
ATTENTION: Starting from V5.0 all updates from previous versions are caried through the "VAG K+CAN Update Request" tool. It is available in the V4.1 package or is available for download here .
Just put the dongle and the interface and start the tool.
Then enter your name, e-mail, interface number and press the "request" button.
A file will be generated in the folder where the tool is placed. Please send the file to our e-mail or accept the question for automatic sending.
You can choose one of the packages we offer here or you can build your own package from the updates bellow:
In order to make your configuration of the VAG K+CAN COMMANDER, first you must always purchase the BASE VERSION INTERFACE in every package you want to order.
 
FULL PACKAGE: 6600 EUR Buy now 6600 EUR
BASE VERSION INTERFACE - AN001 - BASE: 300 EUR Buy now 300 EUR
Updates to the basic package:
AN002 - Odometer by CAN - 250 EUR
- Odometer correct CAN based cars Buy now 250 EUR
AN014 - EDC17 odometer/PIN reading by OBDII - 1000 EUR
- EDC17/MED17 reading security access/component protection/mileage Buy now 1000 EUR
AN012 - A - EDC16x/MED9.x-odometer by OBDII- 500 EUR
- EDC16/MED9x - Read odometer/Change odometer
Buy now 500 EUR
AN012 - B - EDC16/MED9/SIMOS PPD -odometer/PIN EEPROM / ImmoBypass - 1000 EUR
- EDC16/MED9x - EDC16/MED9x - Read EEPROM/ Read odometer/Change odometer/ Securiy
Access Code - supported ECUs with crypto EEPROM / EDC16 IMMOBYPASS function
Siemens SIMOS PPD - reading security access code PIN, component protection
Buy now 1000 EUR
AN003 - PIN by CAN- 300 EUR
- Security code reading (CAN) / Read/Write EEPROM memory of instrument clusters/immobilizers
Buy now 300 EUR
AN004 - IMMO data immobilizer - 250 EUR
- Pannel for programming IMMO data (PIN code/VIN and s.o. in immobilizer), availability to reset instrument cluster/immobilizers from VW/SEAT/SKODA-CAN and Audi A3-CAN to VIRGIN state
Buy now 250 EUR
AN005 - IMMO data ECU, Pannel for programming IMMO data (PIN code/VIN and s.o. in EDC16)*- 250 EUR
-data is stored inside of EEPROM memory of ECU - EDC16x
-data is stored inside of EEPROM memory of ECU - MED9x
*Note: options for programming of immo data must be with the option "security code reading (CAN)"
Buy now 250 EUR
AN006 - Odometer/PIN by K-line - 300 EUR
- K-line UPDATE - Odometer correct / Security code reading / Read/Write EEPROM of instrument cluster/immobilizer
Buy now 300 EUR
AN007 - Read/Write EEPROM ECU - 250 EUR
- Read/Write EEPROM of Engine Control Units Buy now 250 EUR
AN008 - Read/Write flash/counters ECU - 250 EUR
- EDC17/MED17 - Read FLASH by OBDII
- EDC16x Read/Write counters for flashing stored in the EEPROM ST95320 by OBDII
- EDC16 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of
checksums while programming.
- BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8,
MED9x - FSI, EDC16x - Read flashmemory by OBDII
- EDC15x Read/Write flash memory
Buy now 250 EUR
AN009 - Key learning - 800 EUR
- Key learning function
Buy now 800 EUR
Buy now 100 EUR
AN011 - TV Activation - 200 EUR
- VAG MMI TV Activation - A6,A8,Q7 now covers 2007!
Buy now 200 EUR
AN013 - HITAG2 Programmer - 350 EUR
- HITAG-2 transponder/key programmer
Buy now 350 EUR
AN015 - FLASH Memory ECU - Read/Write flash and flash counters in ECU - 500 EUR
- EDC17/MED17 - Read FLASH by OBDII
EDC16x Read/Write counters for flashing stored in the EEPROM ST95320 by OBDII
EDC16 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of
checksums while programming.
BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8, MED9x - FSI,
EDC16x - Read flashmemory by OBDII, EDC15x Read/Write flash memory by OBDII
Buy now 500 EUR
AN016 - DEALER KEY Learning - 500 EUR
- Program delaer keys from 6 or 7 bytes Component protection data
Buy now 500 EUR
TNG - TANGO Programmer - 1000 EUR
- read/write Megamos, Philips, Temic and Texas transponders, writing to T5 , emulating on PCF7930-35, Megamos (48) reading, writing, PIN, unlock by PIN, full range of memory contents
Buy now 1000 EUR |
!!! NEW NEW NEW NEW NEW !!!
VAG Bypass EDC15, EDC 16/MED7x (diesel/petrol) Immobilizer bypass device from 2001 till 2008 year included
|
| This Device can bypass and restore the immobilizer of all petrol (from 1.8 Litre up engines MED7x and MED9x) and diesel (EDC15, EDC16) models from 2001 to 2008 which are equiped with K-Line and new CAN System immobilizer and engine ECU's. After you bypass the immobilizer then you can bring the car to your garage, restore the immobilizer and service the car. With the help of our VAG K + CAN Commander you can program a new key and give it to the customer if you have lost keys situation. This device is also very suitable for automotive garages which are involved in the key programming business and car chip tuning. |
Price: 4150 EUR
 Buy now 4150 EUR
!!! NEW NEW NEW NEW NEW !!!
VAG K + CAN device for EDC15, EDC 16/MED7x (diesel/petrol) Immobilizer bypass(2001 till 2008 year included) and key learning function from 1996 to 2008 year
Models covered
| This Device can bypass and restore the immobilizer of all petrol (from 1.8 Litre up engines MED7x and MED9x ) and diesel (EDC15, EDC16) models from 2001 to 2008 which are equiped with K-Line and new CAN System immobilizer and engine ECU's and can perform key programming function for the VAG Group models from 1996 to 2008 year . After you bypass the immobilizer then you can bring the car to your garage, restore the immobilizer and service the car. With the help of the Device or our VAG K + CAN Commander software, you can program a new key and give it to the customer if you have a lost keys situation. This device is also very suitable for automotive garages which are involved in the key programming business and car chip tuning. |
Price: 5000 EUR
Buy now 5000 EUR
!!! NEW NEW NEW NEW NEW !!!
UNIVERSAL DISPLAY DEVICE V1.2
VAG Group Pin code reader
1996 - 2008 year included |
This device is made to read and show the pin code of all VAG Group cars with CAN and K-Line communication from 1996 to 2008 models. The device can read the pin code from the Immobilizer (Immo 1, Immo 2, Immo 3 and Immo 4 CAN) and Engine ECU's like EDC15, EDC16 and MED9X. When you plug in the device into the OBD II socket, in a few seconds the pin code will be shown on the graphic display, it will automatically recognize the type of the car and immobilizer system. There are three buttons on the display which will be used in the future for key programming function. The device is sold in two packages. Basic package - includes all VAG Group cars equiped with K-Line immobilizer from 1996 to 2004 . Full package - includes all VAG Group cars equiped with K-Line and CAN system immobilizer from 1996 to 2008. This Device is the best choice for all Locksmiths and auto engineers involved in the key programming business.
The Device is updatable and when you buy the basic package after that you can always upgrade to the full package! |
Full package price: 2000 EUR
Basic package: 800 EUR
Buy now Full package 2000 EUR Buy now Basic package 800 EUR
|
|
BMW Commander 3.0
Diagnostic tool for BMW (E3x, E46, E53, E6x, E70, E8x, E9x)
Now covering models from1996 till 2008 year (including) with K-line/CAN BUS/ KWP2000/DS2 communication protocol
|
Features:
- Connecting with all electronic control modules in the vehicle.
- For all electronic control units reading identification data, sw/hw versions, user information fields.
- For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory.
- Possibility to read/program memory of electronic control units (including CAS modules) - this will allow you aligning identification data in an used units.
- Synchronization DME/DDE and CAS
- Special function - Program vehicle ID, Read/Write units Memory
Full package: 1450 EUR Buy now 1450 EUR
Basic package (identification,error memory, synchronization, program ID) - 800 EUR
Buy now 800 EUR
Sofware update for "Memory manager" (except CAS) - 400 EUR Buy now 400 EUR
Software update for "CAS E65" via OBD II(odometer correction, eeprom R/W, key coding) - 250 EUR
Buy now 250 EUR
Note:
* Base interface need to be in your configuration in every case
* Owners of VAG K+CAN Commander can update his interface to BMW base
interface. Price of update is 400 euros. |
!!! NEW NEW NEW NEW NEW !!!
Commander Software for OPEL/VAUXHALL Cars V1.3
No more need to call dealer and wait for the security/pin code to be given in order to program new keys or erase lost or stolen keys as well! Now you can read all new CAN BUS OPEL/Vauxhall car models just via OBD II.
|
Features:
- Connecting with all electronic control modules in the vehicle. Working by K-Line and CAN Bus.
- Reading identification data of all electronic control units .
- Read and clear errors (DTCs) memories of all electronic control units - standart, shadow, history memory.
- Possibility of read/write/program memory of electronic control units.
- Reading security/pin code of vehicle-IMMO1,IMMO2,IMMO3 systems - Vectra C, Corsa D, Astra H,...
|
Price: 1500 EUR
Buy now 1500 EUR
| Renault K + CAN Commander Software V1.0 |
| With Renault K + CAN Commander Software you will be able to program or erase new, old or lost key or card for Renault vehicles via OBD II socket which are using Philips Cryto II(ID46) transponder, known as Hi Tag 2 from 2002 to 2009 year. No more need of Immobilizer pin code as the software will read the pin code from the Immobilzer and will enter it directly. Also, you will beable to change the VIN number in UCH module/immobilizer if you have got a second hand one and you want to replace the old one if it is broken. Also, it will be possible to read/erase fault codes from different modules. |
More info>>>
Models covered:
K - Line vehicles:
|
CAN BUS vehicles: |
- Clio II Ph2/3 X65 - 2002-2006
- Kangoo MUX Ph2 X76 - 2002-2007
- Laguna II X74 - 2001-2005
- Master Ph2 X70 - 2002-2006
- Trafic II X83 - 2002-2006
- Velsatis X73 - 2002+
- Espace IV X81 - 2003-2006
|
- Megane II X84 - 2003-2006
- Megane II Ph2 X84 - 2007+
- Scenic II X84 - 2003+
- Scenic II Ph2 X84 - 2007+
- Laguna II Ph2 X74 - 2005-2007
- Espace IV Ph2 X81 - 2006+
- Velsatis Ph2 X73 - 2006+
|
Price:
On Promotion - 1000 EUR
Buy now 1000 EUR
| Renault K + CAN Key/Card Programming device |
| With Renault K + CAN Key/Card Programming Device you will be able to program or erase new, old or lost key or card for Renault vehicles via OBD II socket which are using Philips Cryto II(ID46) transponder, known as Hi Tag 2 from 2002 to 2009 year. No more need of Immobilizer pin code as the device will read the pin code from the Immobilzer and will enter it directly. |
Models covered:
K - Line vehicles:
|
CAN BUS vehicles: |
- Clio II Ph2/3 X65 - 2002-2006
- Kangoo MUX Ph2 X76 - 2002-2007
- Laguna II X74 - 2001-2005
- Master Ph2 X70 - 2002-2006
- Trafic II X83 - 2002-2006
- Velsatis X73 - 2002+
- Espace IV X81 - 2003-2006
|
- Megane II X84 - 2003-2006
- Megane II Ph2 X84 - 2007+
- Scenic II X84 - 2003+
- Scenic II Ph2 X84 - 2007+
- Laguna II Ph2 X74 - 2005-2007
- Espace IV Ph2 X81 - 2006+
- Velsatis Ph2 X73 - 2006+
|
Price:
On Promotion - 1000 EUR
Buy now 1000 EUR
| Commander Software for Fiat / Lancia / Alfa Romeo V1.0 |
  
More info>>>
Features:
- Odometer correction of CAN based vehicles.
- Support models : Strada, Punto Grande, Punto III, Panda, Palio, Linea, Ducato 2006+, Albea, Chroma 2006+, Doblo, Lancia Musa 2006+, Bravo 2005+, Maserati Quattro porte 2005, 2006.
- Airbag crashdata clear - DUMP TOOL.
- Using Base Interface - AN001. For all owners of VAG K+CAN Commander, BMW Commander, Toyota Commander, Renault Commander.
SPECIAL FUNCTION ECU - EDC15C7 -Bosch - READ/WRITE eeprom, change km via OBDII
Alfa 147
Alfa 156
Alfa 166
Fiat Bravo
Fiat Brava
Fiat Doblo
Fiat Ducato
Fiat Marea
Fiat Marengo
Fiat Multipla
Fiat Punto
Fiat Stilo
Lancia Lybra
Lancia Thesis
SPECIAL FUNCTION ECU - Magneti Marelli MJD6 - READ/WRITE eeprom, change km via OBDII
Fiat Panda - MJD
Fiat Ideia
Fiat Doblo
Fiat Punto
Fiat Grande Punto
Fiat Cinquecento
Lancia Musa
Lancia Ypsilon
|
Prices:
Odometer correction in instrument cluster (DASH) by OBDII - 100 EUR
Odometer correction in ECU by OBDII (R/W eeprom of ECU) - 400 EUR
FULL PACKAGE (odometer correction instrument cluster + ECU) - 500 EUR
| Commander Software for TOYOTA / LEXUS / SCION vehicles |
  
More info>>>
Features:
1. Connecting with all electronic control modules in the vehicle. Working by K and CAN bus diagnostic connection.
2. For all electronic control units read and clear error (DTCs) memories - standart, history memory.
3. Actuator test
4. Current data.
5. Keyprogramming - normal and smart key for vehicles :
Toyota Rav4
Toyota Yaris (2006+)
Toyota Auris
Toyota Land Cruiser 100
Toyota Land Cruiser 120
Toyota Prado
Toyota 4 Runner
Toyota Camry (2004+)
Toyota Corolla (2007+)
Toyota Prado |
Lexus LX470
Lexus RX300
Lexus RX330
Lexus RX350
Lexus RX400
Lexus SC430
Lexus GS300
Lexus GS430
Lexus GS450
Lexus ES350
Lexus IS220
Lexus IS250
Lexus LS460 |
From Main Screen you can choose :
- connect with some control module.
- select vehilcle model and scan modules.
- choose some special function - Immo reset and key programming.
|
Price: 700 EUR
Buy now 700 EUR
Note:
For owners of VAG K+CAN Commander, BMW Commander, Renault Commander - Price - 400 EURO |
MERCEDES Benz Commander Software 1.0
 
More info>>>
Features:
ABRITES Mercedes Commander is a professional software for diagnostic of Mercedes-Benz vehicles. It allows you to perform complete diagnostics of all 1995-present Mercedes-Benz models. It provides some unique functions, which are not supported by any other diagnostic tool.
Diagnostics is performed via the OBD-II connector or via Mercedes-Benz proprietary 38-pin connector (only older cars, pre-2001). Our PC USB diagnostic interface supports over 26 multiplexed K-Lines and Mercedes-Benz diagnostics CAN-BUS interface (also known as CAN-D).
1. Connecting with most electronic control modules in the vehicle. Working by K and CAN bus diagnostic connection.
2. For all electronic control units read and clear error (DTCs) memories - standard.
3. Odometer correction.
4. Read/Write eeprom from Airbag modules, clear crash data.
5. Read/Write eeprom from Immobilizes systems - DAS,AAM,EAM. You can program transponder ready to start the car with the help of the TANGO Programmer connected to the Laptop and the car!
6. Key programming.
7. TV/AUX Activation.
8. Seatbelt warning deactivation.
9. Reverse warning sound deactivation.
10. Actuator test.
11. Actual Values.
Note: Depending on the version that you have purchased some of these functions may not be available in your software.
|
Prices:
| Note: You must always buy the Base Interface! |
Commander Software for PSA Group Cars 1.0
 
More info>>>
Features:
1. Connecting with Engine Control Unit.
2. Read/Write eeprom from EDC15.
3. Read/Change Service list.
4. Immobilizer Enable/Disable.
5. Read PIN/Change PIN.
6. Using Base Interface - AN001.For all owners of VAG K+CAN Commander, BMW Commander, Toyota Commander, Renault Commander. |
Price: 100 EUR
Buy now 100 EUR
| Motorola/Freescale MC912-9S12-9S12(Xgate) in-circuit Programmer |
|
 |
| Authorized dealer for this programmer |
List of all car models covered for in-circuit programming by the programmer
• BMW 1,3,5,6 Series CAS2 White (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black ( 9S12X )
• BMW 7 Series CAS 2002 (HC12)
• BMW 7 Series CAS 2005 facelift (9S12)
• BMW X3/X5 EWS4 (9S12) incl. 2007 version !!!New!!! (editing of EWS4's 9S12D64 now works)
• Ford Mustang 2007 (9S12) !!!New!!!
• Landrover Freelander 2002 (HC12)
• Landrover Freelander 2004 (HC12)
• Mercedes A-Class 2004 Key Module (9S12)
• Mercedes C/CLK C209 ZGW (9S12) **
• Mercedes E/C W211 Key Module (HC12) **
• Mercedes E/C/CLK/SLK W211 Key Module (9S12) **
• Mercedes ML/R W164 Key Module (9S12) **
• Mercedes S/SL EZS R230 (9S12) **
• Mercedes Sprinter 2007 EZS (9S12) !!!New!!!
• Mini One/Cooper Dashboard (HC12)
• Mini One/Cooper Dashboard NAVI (HC12)
• Mini One/Cooper EWS4 (9S12)
• Mini One/Cooper CAS3 Black ( 9S12X )
• Volkswagen Crafter 2007 EZS (9S12) !!!New!!!
** - NOT for new NEC based modules (Amazonas, Havanna, Palermo, Spanien). |
R260S Programmer can program the Motorola/Freescale 68HC912/MC912/MC9S12
microcontroller families, including the latest MC9S12X XGATE-based processor family. The
system works as a in-circuit programmer, no needs to remove the chip from the target board nor
lifting any pin. It connects to the board via serial connection by using only few wires and it works
with secured chips, too. No matter if it is secured or not! |
| IMPORTANT!!! This interface can program any board that uses a HC12 , 9S12 or 9S12X series Motorola/Freescale secured and nonsecured microcontroller |
!!!!!!!THIS IS THE ORIGINAL and MOST RELIABLE ONE!!!!!!!!
Be aware that some competitors are providing copies of this tool without the automatic learning algorithm making them really unsafe. Use them at your own risk!
Price – 2100 EUR (Incl. VAT)
Buy now 2100 EUR
|
|
| Hi Tag 2 Programmer and key generating tool V5.0 |
|
New software for generating transponders and keys for LAND ROVER and RANGE ROVER(Sport) ready to start the vehicle is now developed and ready for sale for our Hi Tag 2 Programmer. Update costs 500 EUR.
PCF7936/7942/7944/7946 - password and cipher mode programmer. The Programmer can read and copy transponders known as Hi Tag 2, intergrated in the new car models after 2003 year, all these transponders are in the keys of new vehicles like BMW, VW, Audi, Porsche, OPEL, SAAB, Puegeot, Citroen, Mitsubishi and so on . The programmer can work in password and cipher mode.
! ! ! NEW NEW NEW NEW NEW NEW ! ! !
Now with Hi Tag 2 Programmer you can program the remote controls on BMW keys direct!
The new fuction added to the The High Tag 2 programmer is the key programming for new series for BMW cars like 1(E87), 3(E90/E91/E93), 5(E60/E61), 6(E63/E64), 7(E65/E66), Z4(E85/E86), new X5(E70), Range Rover/Land Rover and programming transponders for EWS 2, 3/3+ and 4. The programmer works with original keys as well as with High Tag 2 chips produced from Philips company. Now you can read/write data stored inside of the key like Identification number and mileages/km! In order to program a key or transponder, first you must read the memory/eprom/dump of the processor in the immobilizer(EWS, CAS or KESSY module 2007/2008) of the car and then you load it to the programmer and program the new key, after that you save the new file and write it back to the processor. To be able to use this new function, you will have to buy special programmer for processors MC68HC912 and 9S12 for CAS modules.
Another new function of the Hi Tag 2 Programmer is generating transponder key to start the vehicle from dump for NEW AUDI A8, VW Touareg, VW Phaeton, Porsche Cayenne and Bentley Continental and prepairingan original transponder for programming with diagnostic equipment.(this function is available only if you buy the full package)
|
|
|
|
|
!!! NEW NEW NEW NEW NEW !!!
TOYOTA & LEXUS Key learning device
 
| The device program key for 3 seconds and works on models with TEXAS Crypto transponders. The device now works also on the latest Toyota/Lexus models including 2008 year equiped with the latest SMART KEY System. To see the models covered by the device clik here. |
| Price: 1200 EUR (incl. VAT) |
Buy now 1200 EUR
| Now is available for sale a transponder key 4D/Texas Crypto for Land Cruiser from 2003 year and ready to program it with our Toyota key learning device. The price of the key is 200 EUR !!!! |
TOYOTA & LEXUS
Master key head for fixed transponder 4C
The transponder head can be used for starting the car, manual key programming or erasing of transponders keys with fixed transponder 4C for Toyota/Lexus cars.
Price: 250 EUR
Buy now 250 EUR
| TANGO programmer V1.32 - new generation of transponder programmer |
| Tango programmer is a new generation of transponder programmer which is developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies. With the help of the Tango programmer and VAG Commander Software connected together to the car, you can prepare transponder/key for all CAN BUS VAG Group cars (2004-2008) ready for programming and start the car. Anyone who has our original VAG K + CAN Commander Software with active Key Learning software module or package, can use the Tango programmer for the above function. |
List of supported transponders:
Philips transponders:
PCF7930-31 writing, reading
PCF7935 writing, reading, shadow memory
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
*Auto switching between PCF7936 … PCF7952 windows if invalid type detected.
*Autodetect manchester / biphase
Temic transponders:
Temic 11 reading , writing to T5
Temic 12 reading , writing to T5
Megamos transponders:
Megamos (13) reading , writing to T5 , emulating on PCF7930-35
Megamos (48) reading, writing, PIN, unlock by PIN, full range of memory contents
Texas transponders:
Tiris (4C) reading |
| Basic package price: 1000 EUR |
Buy now 1000 EUR
Note:
TANGO Programmer doesn't work with chinese copies of our VAG K + CAN Commander Software. It works only with original VAG K + CAN Commander Software |
The Gambit programmer is mainly produced for programming RFID transponders and generating RFID transponders from the immobilizer dump/eeprom of the car, in order to be able to start the vehicle. This is a genuine one and not a chinese copy.
Gambit programmer works with PCF7935, PCF 7936 and T5 transponders which are not precoded and are completely blank.
For support and sales in english, please, contact on our e-mail or telephone numbers.
For support in russian, please, click here
|
| Full package price: 800 EUR |
Buy now 800 EUR
KEY PROG tester is now version 5.80
Key programming tester come with one year guarantee |
|
|
KEY PROG is the most powerful and best tool for fixed and crypto transponder key programming in the World. With the help of this tool you can easily program new and original transponder keys, remote controls and immobilizers ECU’s. This is the perfect tool for every automechanic and autolocksmith involved io key programming and diagnostics. Discounts appears for ordering more than one unit.
KEY PROG - full software version now is 5.21
NEW NEW NEW NEW NEW NEW NEW NEW
promotional fee of 300 EUR Now all customers who has bought the original AD100 or T-CODE from Advanced-Diagnostics and ELME TOOLS can also make an online update from our server after you pay the with your original password and serial number. You will get an username from us and then you will make your update. Once you start updating your unit from our server after that you can always update again from the Advanced Diagnostic server but then you will only get the software that you have paid for to Advanced Diagnostics or ELME TOOLS. You should think about it because it is much better to pay for full software version than to pay thousands of euros for getting new software from AD. Also you can always go back to your original status!
To get more information about the update like password and username and payment details, please send an e-mail to info@vag-info.co.uk or call 00359/ 888/ 212 767
Buy now latest software version for 300 EUR
Now you can buy our special software version for KeyProg just for 500 EUR which will show you on the tester screen the Incode and Outcode needed for reading the pin code of OPEL/VAUXHALL cars with petrol engine ECU's.
Buy now special Key Prog software for 500 EUR
! ! ! IMPORTANT MESSAGE! ! !
For all customers who want to update their T300, Automam/Automan, AD100 and T-CODE units. Be carefull when you getting the update loader.exe file. Advanced Diagnostics has made copies of all our websites and advertize them on the Internet and it is said on them that the updating of the units is free and you can download the Loader.exe and software for free. Do not use this loader to update your machines because they put a virus in it and your machine will stop. If you really want to update your machine then write us an e-mail or call us to get your username and password to update your machine but only after you pay the fee. Do not make free update on the Internet!!!
! ! ! IMPORTANT MESSAGE! ! !
Models covered:
- Chrysler / Jeep / Plymouth
- Peugeot
- Daewoo / Chevrolet
- Fiat / Alfa / Lancia
- Ford
- Ford USA / Mercury / Lincoln
- General Motors / Vauxhall / Opel - Pin Code reading of early models and Corsa C, Tigra B and Meriva
- Honda / Acura
- Hyundai - 6 digits pin code generator after 2000 year
- Iveco
- Jaguar
- Kia - 6 digits pin code generator after 2000 year
- Land Rover
- Mazda
- Mitsubishi
- Nissan / Infinity
- Citroen
- Proton
- Renault
- Rover
- SAAB
- Subaru
- Suzuki
- Toyota / Lexus
- VW / Audi / Seat / Skoda - Pin Code reading of VAG models till 2006 year
PROMOTIONAL PRICE: 799 EUR (including all cables and full software)
If you buy 5 or more than 5 Key Prog machines then the price will be 599 EUR
Buy now 799 EUR
|
| PIN codes reading software |
|
For all customers who has bought the PIN Reader Software must register with the dongle/cable serial number and usable e-mail, in order to be able to visit and register to our server for future online updates and visiting our customer area |
More info....
|
|
Kombiinstrument / Immo box reader and programmer, OPEL Airbag reseting and VAG kilometers programm and change via OBD II connector! You can choose USB or COM 1 port connection to OBD II port! Works on any computer with Wi | | |
