Latest news:

1. MAKING DEALER KEYS for almost all VAG models including latest models 2008+ (supported are all models which are using Megamos 48 or Hitag-2 transponders)
2. Own precoded transponders TA2/TA3/TA4/TA5 are used in ABRITES VAG Commander 6.2 to produce dealer keys.
3. Dealer keys are made from the TA2/TA3/TA4/TA5 using the 6 or 7 bytes of the component protection data (making from the 7 bytes is made immediately while making from the 6 bytes requires till 10min).
4. Possible to produce TP22/TP23/TP24/TP25 transponders from the ABRITES TA2/TA3/TA4/TA5 transponders.
5. Decoding of the Passat B6 comfort module in order to get all 7 bytes of the component protection data.
6. Extended support for MED9x engine control units.
7. Extended support for EDC17x engine control units.
8. Support of new software versions for Skoda Roomster, Skoda Fabia, VW Polo, Seat Ibiza (2008 year).
9. Special functions added - Service Interval Reset, Remote Control Adaptation, Navigation - Eject disk, Enable/Disable Eject button, Enter Tire Circumference, Cruise control system - Activate/deactivate cruise control, change steering wheel electronics unit configuration, Brake pad change (Audi A8 2004+, Audi A6 2006+, Audi Q7 2009+, VW Tiguan 2009+,VW Passat B6) - open/close parking brake for pad change, parking brake function test, enter Pad thickness value (Audi A8 only).
10. Added some new version of VDO instruments, Added possibility to make EDC16 virgin in the dump tool and changed communication indication when performing standard diagnostic
    
    

Features:

• Instrument CAN
  - With this function you can establish diagnostic session with the Instrument cluster using KWP2000 over TP2.0
  - You can read current odometer value
  - You can change odometer value
  - Added support for VDO Instrument Cluster 2006+
  - Read/Program memory of instrument cluster immobilizer
  - Reading security access code of the IMMOBILIZER
  - Reading security code (PIN) and component protection via OBDII - VW CRAFTER
  - Read/Write immobilizer related data
  
  
• EZS - Kessy (Q7/A6/Allroad)
  - With this function you can prepare dealer key/learn dealer key
  - Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)
  
  
• Instrument K-Line
  - With this function you can establish disgnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)
  - You can Read/Change odometer value
  - Read PIN code
  - Read/Write eeprom
  - Read ROM/Flash from the Instrument cluster
  
• Engine Control Unit
  - Read EDC17/MED17 flash memory
  - Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of
  checksums while programming, ME7.1.1, MED9.x, ME7.5)
  - Read/Write flash counters (EDC16)
  - Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
  - Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD)
  - Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)
  - Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
  - Odometer correction (EDC15, EDC16)
• Kessy adaptation
  - This function can be used for adaptation of brand new kessy units to the car. This adaptation can be by CAN TP2.0, K-KWP2000 and also can be used with Porsche Cayenne.
• TV activation ED1/ED2
  - Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF
  
  
• Key learning
  - With this function you can learn key/transponder to the vehicle
  
• Dump tool
  - With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the correcponding unit
  
• Airbag
  - With this special function you can Read/Write EEPROM memory of the airbag module
  - Clear the crash data of the airbag module
  
• Custom Read/Write
  - Using this application you can read/program memory in some electronic control unit
  
• PIN Convertor
  
• Service interval
  - Using this function you can perform reset of the service reminder, reset of the service interval parameters or change service interval options
  
• Remote control adaptation
  - Using this application, you can learn remote controls
  
• Navigation
  - Using this application, you can enable/disable the “Eject” button of the “Navigation” system
  
• Cruise control system
  - Using this application, you can activate/deactivate a cruise control system and change the related
  steering wheel electronics( SWE) configuration if SWE unit is available
  
• Brake pads change
  - Using this application, you can “Open rear parking brake for pad change”, “Close rear parking
  brake”, perform “Parking brake function test”