|
We are member of the Elelctronic department of the
EUROPEAN LOCKMASTER GROUP
Motorola/Freescale MC912-9S12-9S12(Xgate) in-circuit Programmer
| Authorized dealer for this programmer |
List of all car models covered for in-circuit programming by the programmer
• BMW 1,3,5,6 Series CAS2 White (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black ( 9S12X )
• BMW 7 Series CAS 2002 (HC12)
• BMW 7 Series CAS 2005 facelift (9S12)
• BMW X3/X5 EWS4 (9S12) incl. 2007 version !!!New!!! (editing of EWS4's 9S12D64 now works)
• Ford Mustang 2007 (9S12) !!!New!!!
• Landrover Freelander 2002 (HC12)
• Landrover Freelander 2004 (HC12)
• Mercedes A-Class 2004 Key Module (9S12)
• Mercedes C/CLK C209 ZGW (9S12) **
• Mercedes E/C W211 Key Module (HC12) **
• Mercedes E/C/CLK/SLK W211 Key Module (9S12) **
• Mercedes ML/R W164 Key Module (9S12) **
• Mercedes S/SL EZS R230 (9S12) **
• Mercedes Sprinter 2007 EZS (9S12) !!!New!!!
• Mini One/Cooper Dashboard (HC12)
• Mini One/Cooper Dashboard NAVI (HC12)
• Mini One/Cooper EWS4 (9S12)
• Mini One/Cooper CAS3 Black ( 9S12X )
• Volkswagen Crafter 2007 EZS (9S12) !!!New!!!
** - NOT for new NEC based modules (Amazonas, Havanna, Palermo, Spanien).
|
R260S Programmer can program the Motorola/Freescale 68HC912/MC912/MC9S12
microcontroller families, including the latest MC9S12X XGATE-based processor family. The
system works as a in-circuit programmer, no needs to remove the chip from the target board nor
lifting any pin. It connects to the board via serial connection by using only few wires and it works
with secured chips, too. No matter if it is secured or not! |
IMPORTANT!!! This interface can program any board that uses a HC12 , 9S12 or 9S12X series Motorola/Freescale secured and nonsecured microcontroller |
!!!!!!! THIS IS THE ORIGINAL and MOST RELIABLE ONE !!!!!!!!
Be aware that some competitors are providing copies of this tool without the automatic learning algorithm making them really unsafe. Use them at your own risk!
Price – 1800 EUR
  Buy now 1800 EUR
Hi Tag 2 Programmer and key generating tool V 6.4
* Programming of remote control for the latest BMW vehicles with smart key with PCF7945C05 transponder (for this function you have to send the hardware for upgrade, it is paid upgrade)
* Added new versions of Kessy modules 2008/2009 year - Audi A8/VW Touareg/VW Phaeton/Porsche Cayenne/Bentley Continental
* Display key status from dump - sec.access, frequency, used keys
* Added function to read the 7th byte CS from the existing key
Software for generating transponders and keys for LAND ROVER and RANGE ROVER(Sport) ready to start the vehicle is now developed and ready for sale for our Hi Tag 2 Programmer.
PCF7936/7942/7944/7946 - password and cipher mode programmer. The Programmer can read and copy transponders known as Hi Tag 2, integrated in the new car models after 2003 year, all these transponders are in the keys of new vehicles like BMW, VW, Audi, Porsche, OPEL, SAAB, Peugeot, Citroen, Mitsubishi and so on . The programmer can work in password and cipher mode.
The new function added to the The High Tag 2 programmer is the key programming for new series for BMW cars like 1(E87), 3(E90/E91/E93), 5(E60/E61), 6(E63/E64), 7(E65/E66), Z4(E85/E86), new X5(E70), Land Rover/Range Rover and programming transponders for EWS 2, 3/3+ and 4. The programmer works with original keys as well as with High Tag 2 chips produced from Philips company. Now you can read/write data stored inside of the key like Identification number and mileages/km! In order to program a key or transponder, first you must read the memory/eeprom/dump of the processor in the immobilizer(EWS, CAS or KESSY module2007/2008) of the car and then you load it to the programmer and program the new key, after that you save the new file and write it back to the processor. To be able to use this new function, you will have to buy our special programmer for processors MC68HC912 and 9S12 for CAS modules.
Another new function of the Hi Tag 2 Programmer is generating transponder key to start the vehicle from dump for NEW AUDI A8, VW Touareg, VW Phaeton, Porsche Cayenne and Bentley Continental and preparing an original transponder for programming with diagnostic equipment.(this function is available only if you buy the full package)
Key Info Reader
specially developed to read the service and security information from the key memory
This Device and programmer is specially developed buy our company to read/write all data from the car key/card memory like VIN number, key ID number, colour of the car, UPH colour code, first registration of the car, last time you have drive the car and the the last mileages/km written on the dashboard! This Device is very usefull for Customs, Border Police, Local Police Departments, Insuarance companies and other Government Institutions. The Device supports only car models which are using Philips Crypto - Hi Tag 2(ID46) transponder in the key like BMW, OPEL, RENAULT, KIA, HYUNDAI, SAAB, SUZUKI, PEUGEOT, CITROEN, HONDA, AUDI A8, VW TOUAREG, VW PHAETON, PORSCHE CAYENNE and many other car models using the Hi Tag 2(ID46) transponder.
Special functions - resetting the mileages/km and read/write the internall eeprom area of the BMW keys. Using the device as a Hi Tag 2 programmer. |
| TANGO programmer V1.54 - new generation of transponder programmer |
| Tango programmer is a new generation of transponder programmer which is developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies. With the help of the Tango programmer and VAG Commander Software connected together to the car, you can prepare transponder/key for all CAN BUS VAG Group cars (2004-2008) ready for programming and start the car. Anyone who has our original VAG K + CAN Commander Software with active Key Learning software module or package, can use the Tango programmer for the above function. |
List of supported transponders:
Philips transponders:
PCF7930-31 writing, reading
PCF7935 writing, reading, shadow memory, crypto calculator
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7961 transponder, remote, Manchester & Biphase encodings
*Auto switching between PCF7936 … PCF7961 windows if invalid type detected.
*Autodetect manchester / biphase
Temic transponders:
Temic 11 reading , writing to T5
Temic 12 reading , writing to T5
Megamos transponders:
Megamos (13) reading , writing to T5 , emulating on PCF7930-35
Megamos (48) reading, writing, PIN, unlock by PIN,
full range of memory contents, crypto calculation
Megamos CRYPTO-2 (8E)
Texas transponders:
Tiris (4C) reading
Tiris (4D) DST crypto reading, writing, crypto calculator
Tiris (4E) DST crypto reading, writing, crypto calculator
Atmel:
TK5551M (T5 replacement)
SAAB reading , writing to T5
The product is in working out stages, therefore the list of the supported transponders will be developed later. |
| Basic package price: 1200 EUR |
  Buy now 1200 EUR
Note:
TANGO Programmer doesn't work with chinese copies of our VAG K + CAN Commander Software. It works only with original VAG K + CAN Commander Software |
is the most powerful and best tool for fixed and crypto transponder key programming in the World. With the help of this tool you can easily program new and original transponder keys, remote controls and immobilizers ECU's. This is the perfect tool for every automechanic and autolocksmith involved in auto key programming and diagnostics. Discounts appears for ordering more than one unit.
KEY PROG - full software version now is 7.28
NEW NEW NEW NEW NEW NEW NEW NEW
promotional fee of 300 EUR Now all customers who has bought the original AD100 or T-CODE from Advanced-Diagnostics and ELME TOOLS can also make an online update from our server after you pay the with your original password and serial number. You will get an username from us and then you will make your update. Once you start updating your unit from our server after that you can always update again from the Advanced Diagnostic server but then you will only get the software that you have paid for to Advanced Diagnostics or ELME TOOLS. You should think about it because it is much better to pay the for full software version than to pay thousands of euros for getting new software from AD. Also you can always go back to your original status!
To get more info about the update like username and password and payment details, please, send an e-mail to info@vag-info.com or call 00359/ 888/ 212767
! ! ! IMPORTANT MESSAGE! ! !
For all customers who want to update their T300, Automam/Automan, AD100 and T-CODE units. Be carefull when you getting the update loader.exe file. Advanced Diagnostics has made copies of all our websites and advertize them on the Internet and it is said on them that the updating of the units is free and you can download the Loader.exe and software for free. Do not use this loader to update your machines because they put a virus in it and your machine will stop. If you really want to update your machine then write us an e-mail or call us to get your username and password to update your machine but only after you pay the fee. Do not make free update on the Internet!!!
! ! ! IMPORTANT MESSAGE! ! !
Models covered:
- Chrysler / Jeep / Plymouth
- Peugeot
- Daewoo / Chevrolet
- Fiat / Alfa / Lancia
- Ford
- Ford USA / Mercury / Lincoln
- General Motors / Vauxhall / Opel - Pin Code reading of early models and Corsa C, Tigra B and Meriva, Astra G, Zafira A, Vactra B
- Honda / Acura
- Hyundai - 6 digits pin code generator after 2000 year
- Iveco
- Jaguar
- Kia - 6 digits pin code generator after 2000 year
- Land Rover
- Mazda
- Mitsubishi
- Nissan / Infinity
- Citroen
- Proton
- Renault
- Rover
- Subaru
- Suzuki
- Toyota / Lexus
- VW / Audi / Seat / Skoda - Pin Code reading of VAG models till 2006 year
PROMOTIONAL PRICE: 499 EUR (including all cables and full software)
If you buy 5 or more than 5 Key Prog machines then the price will be 599 EUR
Shipping is not included in the price!!!
Buy now 499 EUR
|
OMEGA - ORANGE Programmer
This is the original OMEGA-ORANGE Programmer produced in Bulgaria which is specially developed for work with vehicle Immobilizers, KM/Mileages changing from eeprom dump and Airbag reseting from dump. With OMEGA Programmer you can also read most types of microprocessors, eeprom and flash memories.
Prices:
Immobilizer package - 500 EUR Buy now 500 EUR
KM/Mileage change package - 850 EUR Buy now 850 EUR
OMEGA Airbag resetting package - 850 EUR Buy now 850 EUR
VW/OPEL TMS Programmer
VW immobilizer |
OPEL Immobilizer |
|
