|
| |
|
|
| VAG K + CAN Commander Software version 6.0 |
|
For all customers who want to buy the VAG CAN +K COMMANDER Software must pay attention to this, that the original software version for the moment is 6.0 but not 8.0 or 9.0, these are fake chinese software copies of our original software and they do not work.
!!! NEW NEW NEW NEW NEW !!!
EDC17/MED17 reading security access/component protection/mileage
Must be ordered as a new software module - AN014 |
VAG-CAN COMMANDER Software is developed to work with the new and old models of Volkswagen, AUDI, SEAT, SKODA and Porsche Cayenne cars equipped with K-Line and CAN communication System from 1995 year to nowadays. With this software you can read the security pin code, change the mileages and kms on all these models, program new keys and do complete diagnostic. The software works with the special CAN interface which are sold as package.
Functions of the VAG COMMANDER Software:
Latest news:
- New! New! New! BY OBDII - EDC17/MED17 reading security access/component protection/mileage.
- New! New! New! ECU Siemens SIMOS PPD - by OBDII reading security access code/component protection.
- MED9 crypted EEPROM - by OBDII reading security access code/component protection
- Skoda Superb 93C86 crypto - Read/Write EEPROM of instrument cluster by OBDII. Mileage correction/PIN.
- Tool for preparation transponders like ordered from dealer so for VW Passat 6,... can be used usual TP23
- Possibility for skiping component protectin while programming keys in VW/Seat/Skoda
- EDC16 - Immo bypass function by OBDII
- New! New! New! BY OBDII - EDC16 BYPASS OF THE IMMOBILIZER SYSTEM! New! New! New!
Features:
- Full diagnistic activities CAN TP2.0, CAN TP1.6, KW1281, KW2000
- Autoscan of all units using CAN TP2.0, CAN TP1.6, KW1281 and KW2000
- Covers all electronic control units in the vehicles (CAN-TP2.0).
- Manual definition of running diagnostic session.
- Broadcast diagnostic request – disable normal communication, clear DTCs, Logistic (transport) mode,.....
- Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Supported is also adaptation of a KESSY unit to the vehicle (K/CAN/Porsche-CAN)
- Most of popular diagnostic requests – identifications, coding, adaptations, DTCs, measured values, basic setting, and s.o. Functions are under CAN-TP2.0.
- Special function - odometer correction in instrument clusters and EDC15x by OBDII.
- Special function - READING EDC16x EEPROM by OBDII
- Special function - Reading/Writing odometer in EDC16x by OBDII
- Special function - Reading Security Access Code/Login WFS from EDC16x by OBDII
- Special function - Reading Security Access Code/Login WFS from MED 9.x by OBDII
- Special function - read Security Access Code/Login WFS.
- Special function - read/program immobilizer data stored in the immobilizer.
- Special function - programming immobilizer data stored in the EEPROM of EDC16 and MED9x by OBDII.
- Special function - programming reflashing counters stored in the EEPROM of EDC16 by OBDII. Now supported EDC16CP34 VW Touareg!
- Special function - read/write EEPROM from instrument cluster/immobilizer. Now is covered also Audi A4 BOSCH RB8 Crypto cluster, VW Touareg 2007/2008 CAN, VW Phaeton 2008 CAN, Porsche Cayenne 2008 CAN, Bentley Continental 2008 CAN !
- Special function - VAG MMI TV Activation - now covers year 2007.
- Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
- Special function - Key learning. Can be programmed key to Audi A8, Audi A3, Skoda Octavia II (2007+), VW Touareg 2007/2008, VW Phaeton 2008, Bentley Continental 2008, Porsche Cayenne 2008 independed from component security protection! Allowed is direct connection with HITAG-2 programmer.
- Special function - Airbag units - Read/Write EEPROM by diagnostic! Clearing crash data! All VW/Audi/Seat/Skoda-Bosch/Siemens airbag modules up to year 2005
- Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
- Special function - Read / Write flash memories EDC16x, EDC15x, ME7x, MED9x, PPD1.x (EDC16 - checksum calculations while programming
- Special function - Read / Write of reflashing counters stored in the EEPROM of EDC16 by OBDII (now not possible to be detected that your engine control unit is reflashed! ADDITIONALY NOW YOU CAN SET FLASHTOOL NUMBER TO ANY VALUE!
- Special function - Calculators by dump of EEPROM - KESSY - security code, SIMOS PPD1.4/1.5 security code, Skoda Fabia, Skoda Roomster, VW Polo, Seat Ibiza 93C86 CRYPTO; EDC16 odometer correction/checksums; GATEWAY 95160 - odometer correction; MED9x checksums; ....
- Special function - programming dashboards from VW/SEAT/SKODA (CAN) and AUDI A3 (CAN) in VIRGIN status - FREE FOR ALL OWNERS OF "IMMO PANNEL".
- Special function - programming dashboards from VW/SEAT/SKODA/AUDI (K) 93C86 and AUDI A4 RB4 BOSCH in VIRGIN status - so will not need anymore from PIN code for the adaptaton - FREE FOR ALL OWNERS OF "K update instrument cluster".
Models covered>>>
Download User manual
Models covered for extracting security pin codes
Models covered for Odometer correction
ATTENTION: Starting from V5.0 all updates from previous versions are caried through the "VAG K+CAN Update Request" tool. It is available in the V4.1 package or is available for download here .
Just put the dongle and the interface and start the tool.
Then enter your name, e-mail, interface number and press the "request" button.
A file will be generated in the folder where the tool is placed. Please send the file to our e-mail or accept the question for automatic sending.
You can choose one of the packages we offer here or you can build your own package from the updates bellow:
In order to make your configuration of the VAG K+CAN COMMANDER, first you must always purchase the BASE VERSION INTERFACE in every package you want to order.
 
FULL PACKAGE: £ 4400 Buy now £ 4400
BASE VERSION INTERFACE - AN001 - BASE: £ 240 Buy now £ 240
Updates to the basic package:
AN002 - Odometer by CAN - £ 200
- Odometer correct CAN based cars Buy now £ 200
AN014 - EDC17 odometer/PIN reading by OBDII - £ 800
- EDC17/MED17 reading security access/component protection/mileage Buy now £ 800
AN012 - A - EDC16x/MED9.x-odometer by OBDII- £ 400
- EDC16/MED9x - Read odometer/Change odometer
Buy now £ 800
AN012 - B - EDC16/MED9/SIMOS PPD -odometer/PIN EEPROM / ImmoBypass - £ 800
- EDC16/MED9x - EDC16/MED9x - Read EEPROM/ Read odometer/Change odometer/ Securiy
Access Code - supported ECUs with crypto EEPROM / EDC16 IMMOBYPASS function
Siemens SIMOS PPD - reading security access code PIN, component protection
Buy now £ 800
AN003 - PIN by CAN- £ 350
- Security code reading (CAN) / Read/Write EEPROM memory of instrument clusters/immobilizers
Buy now £ 350
AN004 - IMMO data immobilizer - £ 200
- Pannel for programming IMMO data (PIN code/VIN and s.o. in immobilizer), availability to reset instrument cluster/immobilizers from VW/SEAT/SKODA-CAN and Audi A3-CAN to VIRGIN state
Buy now £ 200
AN005 - IMMO data ECU, Pannel for programming IMMO data (PIN code/VIN and s.o. in EDC16)*- £ 200
-data is stored inside of EEPROM memory of ECU - EDC16x
-data is stored inside of EEPROM memory of ECU - MED9x
*Note: options for programming of immo data must be with the option "security code reading (CAN)"
Buy now £ 200
AN006 - Odometer/PIN by K-line - £ 240
- K-line UPDATE - Odometer correct / Security code reading / Read/Write EEPROM of instrument cluster/immobilizer
Buy now £ 240
AN007 - Read/Write EEPROM ECU - £ 200
- Read/Write EEPROM of Engine Control Units Buy now £ 200
AN008 - Read/Write flash/counters ECU - £ 400
- EDC17/MED17 - Read FLASH by OBDII
- EDC16x Read/Write counters for flashing stored in the EEPROM ST95320 by OBDII
- EDC16 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of
checksums while programming.
- BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8,
MED9x - FSI, EDC16x - Read flashmemory by OBDII
- EDC15x Read/Write flash memory
Buy now £ 400
AN009 - Key learning - £ 800
- Key learning function
Buy now £ 800
Buy now £ 80
AN011 - TV Activation - £ 160
- VAG MMI TV Activation - A6,A8,Q7 now covers 2007!
Buy now £ 160
AN013 - HITAG2 Programmer - £ 280
- HITAG-2 transponder/key programmer
Buy now £ 280 |
!!! NEW NEW NEW NEW NEW !!!
VAG Bypass EDC15, EDC 16/MED7x (diesel/petrol) Immobilizer bypass device from 2001 till 2008 year included
|
| This Device can bypass and restore the immobilizer of all petrol (from 1.8 Litre up engines MED7x and MED9x) and diesel (EDC15, EDC16) models from 2001 to 2008 which are equiped with K-Line and new CAN System immobilizer and engine ECU's. After you bypass the immobilizer then you can bring the car to your garage, restore the immobilizer and service the car. With the help of our VAG K + CAN Commander you can program a new key and give it to the customer if you have lost keys situation. This device is also very suitable for automotive garages which are involved in the key programming business and car chip tuning. |
Price: £ 3320
 Buy now £3600
!!! NEW NEW NEW NEW NEW !!!
VAG K + CAN device for EDC15, EDC 16/MED7x (diesel/petrol) Immobilizer bypass(2001 till 2008 year included) and key learning function from 1996 to 2008 year
Models covered
| This Device can bypass and restore the immobilizer of all petrol (from 1.8 Litre up engines MED7x and MED9x ) and diesel (EDC15, EDC16) models from 2001 to 2008 which are equiped with K-Line and new CAN System immobilizer and engine ECU's and can perform key programming function for the VAG Group models from 1996 to 2008 year . After you bypass the immobilizer then you can bring the car to your garage, restore the immobilizer and service the car. With the help of the Device or our VAG K + CAN Commander software, you can program a new key and give it to the customer if you have a lost keys situation. This device is also very suitable for automotive garages which are involved in the key programming business and car chip tuning. |
Price: £ 4000
Buy now £4000
!!! NEW NEW NEW NEW NEW !!!
UNIVERSAL DISPLAY DEVICE V1.2
VAG Group Pin code reader
1996 - 2008 year included |
This device is made to read and show the pin code of all VAG Group cars with CAN and K-Line communication from 1996 to 2008 models. The device can read the pin code from the Immobilizer (Immo 1, Immo 2, Immo 3 and Immo 4 CAN) and Engine ECU's like EDC15, EDC16 and MED9X. When you plug in the device into the OBD II socket, in a few seconds the pin code will be shown on the graphic display, it will automatically recognize the type of the car and immobilizer system. There are three buttons on the display which will be used in the future for key programming function. The device is sold in two packages. Basic package - includes all VAG Group cars equiped with K-Line immobilizer from 1996 to 2004 . Full package - includes all VAG Group cars equiped with K-Line and CAN system immobilizer from 1996 to 2008. This Device is the best choice for all Locksmiths and auto engineers involved in the key programming business.
The Device is updatable and when you buy the basic package after that you can always upgrade to the full package! |
Full package price: £ 1600
Basic package: £ 640
Buy now Full package £1600 Buy now Basic package £640
|
|
BMW Commander 3.0
Diagnostic tool for BMW (E3x, E46, E53, E6x, E70, E8x, E9x)
Now covering models from1996 till 2008 year (including) with K-line/CAN BUS/ KWP2000/DS2 communication protocol
|
Features:
- Connecting with all electronic control modules in the vehicle.
- For all electronic control units reading identification data, sw/hw versions, user information fields.
- For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory.
- Possibility to read/program memory of electronic control units (including CAS modules) - this will allow you aligning identification data in an used units.
- Synchronization DME/DDE and CAS
- Special function - Program vehicle ID, Read/Write units Memory
Full package: £1050 Buy now £1050
Basic package (identification,error memory, synchronization, program ID) - £570
Buy now £570
Sofware update for "Memory manager" (except CAS) - £290 Buy now £290
Software update for "CAS E65" via OBD II(odometer correction, eeprom R/W, key coding) - £180
Buy now £180
Note:
* Base interface need to be in your configuration in every case
* Owners of VAG K+CAN Commander can update his interface to BMW base
interface. Price of update is 400 euros. |
!!! NEW NEW NEW NEW NEW !!!
Commander Software for OPEL/VAUXHALL Cars
No more need to call dealer and wait for the security/pin code to be given in order to program new keys or erase lost or stolen keys as well! Now you can read all new CAN BUS OPEL/Vauxhall car models just via OBD II.
|
Features:
- Connecting with all electronic control modules in the vehicle. Working by K-Line and CAN Bus.
- Reading identification data of all electronic control units .
- Read and clear errors (DTCs) memories of all electronic control units - standart, shadow, history memory.
- Possibility of read/write/program memory of electronic control units.
- Reading security/pin code of vehicle-IMMO1,IMMO2,IMMO3 systems - Vectra C, Corsa D, Astra H,...
|
Price: £ 1200
Buy now £ 1200
| Motorola/Freescale MC912-9S12-9S12(Xgate) in-circuit Programmer |
|
 |
| Authorized dealer for this programmer |
List of all car models covered for in-circuit programming by the programmer
• BMW 1,3,5,6 Series CAS2 White (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black ( 9S12X )
• BMW 7 Series CAS 2002 (HC12)
• BMW 7 Series CAS 2005 facelift (9S12)
• BMW X3/X5 EWS4 (9S12) incl. 2007 version !!!New!!! (editing of EWS4's 9S12D64 now works)
• Ford Mustang 2007 (9S12) !!!New!!!
• Landrover Freelander 2002 (HC12)
• Landrover Freelander 2004 (HC12)
• Mercedes A-Class 2004 Key Module (9S12)
• Mercedes C/CLK C209 ZGW (9S12) **
• Mercedes E/C W211 Key Module (HC12) **
• Mercedes E/C/CLK/SLK W211 Key Module (9S12) **
• Mercedes ML/R W164 Key Module (9S12) **
• Mercedes S/SL EZS R230 (9S12) **
• Mercedes Sprinter 2007 EZS (9S12) !!!New!!!
• Mini One/Cooper Dashboard (HC12)
• Mini One/Cooper Dashboard NAVI (HC12)
• Mini One/Cooper EWS4 (9S12)
• Mini One/Cooper CAS3 Black ( 9S12X )
• Volkswagen Crafter 2007 EZS (9S12) !!!New!!!
** - NOT for new NEC based modules (Amazonas, Havanna, Palermo, Spanien). |
R260S Programmer can program the Motorola/Freescale 68HC912/MC912/MC9S12
microcontroller families, including the latest MC9S12X XGATE-based processor family. The
system works as a in-circuit programmer, no needs to remove the chip from the target board nor
lifting any pin. It connects to the board via serial connection by using only few wires and it works
with secured chips, too. No matter if it is secured or not! |
| IMPORTANT!!! This interface can program any board that uses a HC12 , 9S12 or 9S12X series Motorola/Freescale secured and nonsecured microcontroller |
!!!!!!!THIS IS THE ORIGINAL and MOST RELIABLE ONE!!!!!!!!
Be aware that some competitors are providing copies of this tool without the automatic learning algorithm making them really unsafe. Use them at your own risk!
Price – £ 1500(Incl. VAT)
Buy now £ 1500
|
|
| Hi Tag 2 Programmer and key generating tool V5.0 |
|
PCF7936/7942/7944/7946 - password and cipher mode programmer. The Programmer can read and copy transponders known as Hi Tag 2, intergrated in the new car models after 2003 year, all these transponders are in the keys of new vehicles like BMW, VW, Audi, Porsche, OPEL, SAAB, Puegeot, Citroen, Mitsubishi and so on . The programmer can work in password and cipher mode.
! ! ! NEW NEW NEW NEW NEW NEW ! ! !
Now with Hi Tag 2 Programmer you can program the remote controls on BMW keys direct!
The new fuction added to the The High Tag 2 programmer is the key programming for new series for BMW cars like 1(E87), 3(E90/E91/E93), 5(E60/E61), 6(E63/E64), 7(E65/E66), Z4(E85/E86), new X5(E70) and programming transponders for EWS 2, 3/3+ and 4. The programmer works with original keys as well as with High Tag 2 chips produced from Philips company. Now you can read/write data stored inside of the key like Identification number and mileages/km! In order to program a key or transponder, first you must read the memory/eprom/dump of the processor in the immobilizer(EWS, CAS or KESSY module) of the car and then you load it to the programmer and program the new key, after that you save the new file and write it back to the processor. To be able to use this new function, you will have to buy special programmer for processors MC68HC912 and 9S12 for CAS modules.
Another new function of the Hi Tag 2 Programmer is generating transponder key to start the vehicle from dump for NEW AUDI A8, VW Touareg, VW Phaeton, Porsche Cayenne and Bentley Continental and prepairingan original transponder for programming with diagnostic equipment.(this function is available only if you buy the full package)
|
|
|
|
|
!!! NEW NEW NEW NEW NEW !!!
TOYOTA & LEXUS Key learning device
| The device program key for 3 seconds and works on models with TEXAS Crypto transponders. The device now works also on the latest Toyota/Lexus models including 2008 year equiped with the latest SMART KEY System. To see the models covered by the device clik here. |
Buy now £ 960
| Now is available for sale a transponder key 4D/Texas Crypto for Land Cruiser from 2003 year and ready to program it with our Toyota key learning device. The price of the key is £ 160 GBP !!!! |
TOYOTA & LEXUS
Master key head for fixed transponder 4C
The transponder head can be used for starting the car, manual key programming or erasing of transponders keys with fixed transponder 4C for Toyota/Lexus cars.
Price: £ 200
Buy now £ 200
The Gambit programmer is mainly produced for programming RFID transponders and generating RFID transponders from the immobilizer dump/eeprom of the car, in order to be able to start the vehicle. This is a genuine one and not a chinese copy.
Gambit programmer works with PCF7935, PCF 7936 and T5 transponders which are not precoded and are completely blank.
For support and sales in english, please, contact on our e-mail or telephone numbers.
For support in russian, please, click here
|
Buy now £960
KEY PROG tester is now version 5.80
Key programming tester come with one year guarantee |
|
|
KEY PROG is the most powerful and best tool for fixed and crypto transponder key programming in the World. With the help of this tool you can easily program new and original transponder keys, remote controls and immobilizers ECU’s. This is the perfect tool for every automechanic and autolocksmith involved io key programming and diagnostics. Discounts appears for ordering more than one unit.
KEY PROG - full software version now is 5.21
NEW NEW NEW NEW NEW NEW NEW NEW
promotional fee of £215 Now all customers who has bought the original AD100 or T-CODE from Advanced-Diagnostics and ELME TOOLS can also make an online update from our server after you pay the with your original password and serial number. You will get an username from us and then you will make your update. Once you start updating your unit from our server after that you can always update again from the Advanced Diagnostic server but then you will only get the software that you have paid for to Advanced Diagnostics or ELME TOOLS. You should think about it because it is much better to pay for full software version than to pay thousands of euros for getting new software from AD. Also you can always go back to your original status!
To get more information about the update like password and username and payment details, please send an e-mail to info@vag-info.co.uk or call 00359/ 888/ 212 767
Buy now latest software version for £215
Now you can buy our special software version for KeyProg just for £360 which will show you on the tester screen the Incode and Outcode needed for reading the pin code of OPEL/VAUXHALL cars with petrol engine ECU's.
Buy now special Key Prog software for £ 360
! ! ! IMPORTANT MESSAGE! ! !
For all customers who want to update their T300, Automam/Automan, AD100 and T-CODE units. Be carefull when you getting the update loader.exe file. Advanced Diagnostics has made copies of all our websites and advertize them on the Internet and it is said on them that the updating of the units is free and you can download the Loader.exe and software for free. Do not use this loader to update your machines because they put a virus in it and your machine will stop. If you really want to update your machine then write us an e-mail or call us to get your username and password to update your machine but only after you pay the fee. Do not make free update on the Internet!!!
! ! ! IMPORTANT MESSAGE! ! !
Models covered:
- Chrysler / Jeep / Plymouth
- Peugeot
- Daewoo / Chevrolet
- Fiat / Alfa / Lancia
- Ford
- Ford USA / Mercury / Lincoln
- General Motors / Vauxhall / Opel - Pin Code reading of early models and Corsa C, Tigra B and Meriva
- Honda / Acura
- Hyundai - 6 digits pin code generator after 2000 year
- Iveco
- Jaguar
- Kia - 6 digits pin code generator after 2000 year
- Land Rover
- Mazda
- Mitsubishi
- Nissan / Infinity
- Citroen
- Proton
- Renault
- Rover
- SAAB
- Subaru
- Suzuki
- Toyota / Lexus
- VW / Audi / Seat / Skoda - Pin Code reading of VAG models till 2006 year
PROMOTIONAL PRICE: £ 635 (including all cables and full software)
If you buy 5 or more than 5 Key Prog machines then the price will be £ 555
Buy now £ 635
|
| PIN codes reading software |
|
For all customers who has bought the PIN Reader Software must register with the dongle/cable serial number and usable e-mail, in order to be able to visit and register to our server for future online updates and visiting our customer area |
More info....
|
|
Kombiinstrument / Immo box reader and programmer, OPEL Airbag reseting and VAG kilometers programm and change via OBD II connector! You can choose USB or COM 1 port connection to OBD II port! Works on any computer with Windows installed. Car models covered by Pin Reader software:
- VW GOLF IV VDO 1998-2005
- VW GOLF IV Bosch/MotorMeter petrol/diesel ECU – 2001-2005
- VW GOLF IV, BORA/JETTA, PASSAT Motor Meter - 1997-2000
- VW PASSAT VDO B4, B5 & B6 1998-2005
- VW PASSAT Bosch/MotorMeter petrol/diesel – 2001-2005
- VW BORA - JETTA VDO 1998-2005
- VW BORA - JETTA Bosch/MotorMeter petrol/diesel – 2001-2005
- VW POLO VDO 2002-2006
- VW BEETLE Magnetti Mareli 1998-2005
- SKODA OCTAVIA Motor Meter - 1997-2005
- AUDI A3, A4, A6, TT 2000+ & TT USA Magnetti Mareli
- AUDI A3 VDO 1997-2003
- AUDI A4 VDO 1998-2005
- AUDI A4 Bosch/MotorMeter dashboard petrol/diesel 2001-2005
- AUDI A4, A6, A8 External Immo Box (system 1) 1995-1998
- SKODA FABIA VDO 2000-2006
- SKODA OCTAVIA VDO 1997-2005
- SKODA OCTAVIA Bosch/MotorMeter petrol/diesel ECU – 2001-2005
- KIA/HUYNDAI – 6 digits pin code calculator from VIN number for models after 2000
- OPEL AIRBAG RESETING OF CRASH DATA IN AIRBAG – 1996-2004. It can be ordered as a package with PIN Reader or separately
PIN READER - for VAG, OPEL Airbag reset crash data and Kia/Huyndai 6 digits pin code calculator from VIN, KM change and Eprom writing function for VAG group) - £ 215
Buy now £ 215
PIN READER - for VAG, OPEL pin code reading (Corsa C and Meriva), key programming and Airbag reset crash data, Kia, Huyndai 6 digits pin code calculator from VIN and KM change and Eprom writing function for VAG group – £ 430
Buy now £ 430
PIN READER - for VAG,OPEL pin code reading (Corsa C, Meriva and Agila), key programming and Airbag reset crash data, Kia, Huyndai 6 digits pin code and KM change and Eprom writing function for VAG group and Renault Megane(Scenic) pin reading and key programming 1999-2003 – £ 610
Buy now £ 610
|
|
Immobilizer Pin Code Service
We can provide you with the Immobilizer pin code from VIN number, car model, serial number of the key or immobilizer, crypted code and eeprom dump from the immobilizer. In order to get the correct pin code you must send us by e-mail the correct info for the car which is either VIN number, key number, serial number of the immobilizer, crypted code or correct eeprom dump from the immobilizer.
You will get the pin code within the same day or the following day. To receive your pin code we must first receive your payment. You can pay us by credit card (on website and by phone), bank transfer or Western Union !
| Note: It is your own responsibility if you are using this service for illeagal purpose and if you provide us with wrong information and you get the wrong pin code. |
Vehicle covarage:
| Pin by VIN number - ACURA , HONDA, HYUNDAI, INFINITY, KIA and NISSAN |
Pin by car model - MITSUBISHI and SUZUKI |
| Pin by serial number of the KEY or immobilizer - DACIA , INFINITY, MAZDA (LUCAS immo only), NISSAN and RENAULT |
| Pin by crypted pin code - AUDI, BENTLEY, INFINITY, NISSAN, SEAT, SKODA, VOLKSWAGEN |
| Pin by eeprom dump - ACURA , ALFA ROMEO, AUDI, BENTLEY, CADILAC, CHEVROLET, CHRYLER, CITROEN, DACIA, DODGE, FIAT, HOLDEN, HYUNDAI, INFINITY, IZUZU, IVECO, JEEP, KIA, LANCIA, MAZERATI, MAZDA, MERCEDES, MITSUBISHI, NISSAN, OPEL/VAUXHALL, PEUGEOT, PLYMOUTH, RENAULT, ROVER, SEAT, SKODA, SUZUKI, VOLVO and VOLKSWAGEN |
Price: £ 20 (per pin code)
Buy now £ 20
|
|
|
VAG key programmer and Immobilizer bypass
of petrol and diesel(EDC 15) via OBD II - 1996-2006 |
This Device can read the pin code(without showing it), program new keys and start the car for models from 1996 to 2000 and bypass the immobilizer of petrol>1.8 and diesel (EDC15) models and program new keys for models from 2001 to 2006. After you bypass the immobilizer then you can bring the car back to normal with fuctional immobilizer.
The device can also bypass the immobilizer of some car models from VAG Group till 2008 and these are: VW Polo (Cross Country) 1.4 and 1.9 TDI till 2008, SEAT Ibiza 1.4 and 1.9 TDI till 2008, SKODA Fabia and Roomster 1.4 and 1.9 TDI till 2008 and SKODA Superb 1.9 TDI till 2008.
|
Models covered
On promotion - £ 860 (incl. VAT)
Buy now £ 860 |
|
|
|
OPEL immobilizer PIN code reading (Corsa C, Meriva and Agila)
key programming and airbag reseting |
 |
|
 |
|
|
|
OPEL immobilizer PIN code reading and airbag reseting of crash data in all airbag modules/ECU via OBD II. It can be ordered as a package with VAG PIN reader.
OPEL Pin code reading(Corsa C, Meriva and Agila), key programming and AIRBAG reset crash data via OBD II - £ 250
Buy now £ 250
|
|
|
|
|
|
|
|
| Renault Megane and Scenic 8 digits PIN code 1999-2003 |
Reading immobilizer PIN code and key programming on Renault Megane and Megane Scenic modules with UCBIC (BSI) module from 1999 to 2003 year via OBD II. This software can also be ordered as a package together with VAG PIN reader
- Renault Megane - 1999 to 2003
- Renault Megane Scenic - 1999 to2003
PIN READER - for Renault Megane and Megane Scenic 1999-2003 - £ 250
Buy now £ 250
|
|
| Renault 4 digits PIN code generator |
 Software for generating of 4 digits immobilizer PIN code for Renault cars from the number written in the key fob (remote control) - £ 110.
Buy now £ 110
|
| |
|
| BMW
key programming device & software |
|
BMW key programming device for vehicles equiped with EWS 2 module with procesor masks 2D47J and EWS 3/3+ module with procesor masks OD46J, coverage E46, E38, E39, E53(X5), X3(early models), Z3, Range Rover 2002+, MINI COOPER till 2006. The device does not work on EWS 3 module with 2D47J processor mask, due to security reasons. With this device you can program 8 keys in the EWS 2 and 3/3+ module. Another feature of the device is to erase the old and lost keys, add new keys on whatever position you want from 0 to 7 as you leave the existing keys working. You can program new keys when all keys are lost or stolen. The old keys will still work and you can order another key from the dealer beside the number of the new already programmed keys. To be able to program/add new key, you must use our special transponder made for the key programming or the original BMW keys made ready for programming with the Device. The Device comes with 5 transponders for EWS 2 and 5 transponders for EWS 3/3+. With this devce there is no need of a PC or power supply. All the power that you need is the 9 Volts battery which you must put inside the device. There is no need of desoldering the processor, all you have to do is to clip the device onto the processor and press the little black button and the key/transponder will be programmed for 5 seconds.
!!! NEW !!! NEW !!! NEW !!! NEW !!! NEW !!!
For all customer who want to buy and already bought The EWS 2, 3 and 3+ device, we arrange one day course at the price of £1070 where you will learn all about BMW EWS Imobilizer system, how to program new keys without disoldering the processor for 5 seconds, how to define all 10 keys in the EWS module, how to release and ban keys in the EWS module, how to change the mileages/km and ID number and how to make an adaptation to the DME/DDE even if you have a second hand EWS module from the scrap yard.
The price of the course doesn't include the device price but if you pay for the course then you can buy the device at the price of £360 and pay a package priceof £1430 .
For all customers who have bought the BMW Device, now they can order original BMW Remote (Diamond Shape) keys with 2 track and 4 track canals and BMW nonremote keys with lamp 4 tracks like HU58BSP, ready to program them with BMW Key Device. Also available BMW Remote(Diamond shape) key casings, 2 track and 4 track .
The eight DIP switches are used for the programming of teh different key positions from 0 to 7
|
|
|
BMW key programming device & software
for E65 (new 7-th series from 2003 year) via OBD II – £ 920 (incl. VAT)
Buy now £ 920 |
|
 |
 
|
|
| |
|
Porsche Cayenne (CAN and K-Line), VW Phaeton & VW Touareg (petrol/diesel)
key programming device via OBD II including 2008 year |
Porsche Cayene and VW Touareg Key programming device via OBD II. It can program all Porche Cayene and VW Touareg(petrol/diesel models). The device can work on all Porsche Cayenne and new VW Touareg cars equipped with CAN System. The device will not work on cars equipped with SIEMENCE SDI type of ECU. The Device can program Original remote keys or you can use our special transponder for key programming.
|
  |
On promotion – £ 2000 (incl.VAT)
Buy now £ 2000
|
|
|
|
Mercedes
key programming device & software |
 Mercedes Benz Key Programming Device and Software for the models ML from 1998 to 2005 with the metal key(not the plastic electronic key). The Device program/add new key without erasing the existing keys. You can program/add one new key. The programming is done via the diagnostic plug OBD II and takes 8-10 seconds. For programming you must use our special transponder, specially made for the key programming. With the Device also can be programmed original keys ordered from the dealer.
On promotion – £ 560 (incl. VAT)
Buy now £ 560
|
|
|
| Mercedes
key programming device & software NEW DEVICE |
The new Mercedes Benz Key Programming Device and Software for the ML models from 1998 to 2005 with the metal key(not the plastic electronic key) can now program all 8 keys in the Immobilizer. The Device program/add new keys without erasing the existing keys. You can program/add up to 8 new keys. The programming is done via the diagnostic plug OBD II. For programming you must use our special transponder, specially made for the key programming and to choose on which position you want to program the new key or keys with the help of the DIP switches built into the device . The programming is done for 8-10 seconds. With the device you can also program original keys ordered from the dealer.
More info>>>
On promotion – £ 640 (incl. VAT)
Buy now £ 640
|
|
|
UNIVERSAL MERCEDES BENZ TRANSPONDER FOR KEY PROGRAMMING
The transponder is ready to program direct on the Mercedes C, E and G KLASS models from 1996 to 1999 year for all key positions/number from 1 to 8. This transponder is for the models that use the metal or remote flip key with transponder inside. It is not working on models with electronic plastic key. The only thing you have to do is to insert the key into the ignition and turn it on then the transponder will program itself direct and you can start the car.
|
|
| Tech 2 - Original diagnostic tester for GM cars |
 |
TECH 2 is the Original Diagnostic Equipment used by authorised OPEL, SAAB, SUZUKI, Vauxhall and GM Cars dealers worldwide, which means that it offers the most comprehensive diagnostic software available by us for OPEL/Vauxhall, SAAB and GM Cars vehicles. TECH 2 has the ability to diagnose the complete range of electronic systems for engine, transmission, body and chassis. The unit is a powerful, ergonomically designed handheld device that has a large LCD screen with an easy user software interface. A removable Vehicle Communications Interface (VCI) allows any hardware updates to be easily accommodated, protecting your investment. Its diagnostic capability includes fault code retrieval/clearing, live data display, actuator simulation/operation and the ability to record data whilst the vehicle is being driven. TECH 2 is a competitively priced portable solution offering independent garages the ability to diagnose OPEL, SAAB, SUZUKI, Vauxhall and GM vehicles as diagnosed by authorised dealers.
Features:
- OPEL/Vauxhall dealer software.
- Tests OPEL/Vauxhall system 92.
- Tests multi vehicle systems.
- Live data display.
- Flight recorder.
- Data capture and storage.
- Fault code reading / clearing.
- Actuator / sensor simulation.
- Key programming.
- Vehicle ECU initialisation / learn.
- Graphical function.
- Upgradeable hardware module.
- RS232 and RS485 PC interface.
- Self test functions.
|
|
This is original keyboard for Tech 2 tester and can be ordered as a spare part from us - £ 265. |
| TECH 2 TIS Approval Software Dongle | |
